Linux ACPI Test Cases

line

abat0.2_2.6.14_RF_testresults

ACPI ABAT started...

Red Flag Desktop 5.0 RTM
Kernel \r on an \m
Linux localhost.localdomain 2.6.14-7DT #1 Tue Jan 10 10:28:37 CST 2006 i686 i686 i386 GNU/Linux

*******************************************************
* Test ACPI file system interfaces *
*******************************************************

-------------------------------------------------------
ACPI is supported.
-------------------------------------------------------
version: 20050902
-------------------------------------------------------
alarm 2006-04-06 11:25:59
event OK
dsdt OK
fadt OK
sleep S0 S3 S4 S5
wakeup Not set
-------------------------------------------------------
Driver State Device Item Information
------ ----- ------ ---- -----------
ac loaded NO
battery loaded NO
button loaded lid/C1E4 info type: Lid Switch
state state: open
power/PWRF info type: Power Button (FF)
sleep/C1E3 info type: Sleep Button (CM)
ec build-in NO
fan loaded NO
power build-in NO
processor build-in NO
thermal loaded NO
video loaded C0F7 DOS DOS setting: <0>
info Switching heads: yes
Video ROM: no
Device to be POSTed on boot:
no
POST <not supported>
POST_info <not supported>
ROM <TODO>
C0F7/C103 brightness <not supported>
EDID <not supported>
info device_id: 0x0100
type: CRT
known by bios: no
state state: 0x00
query: 0x00
C0F7/C104 brightness <not supported>
EDID <not supported>
info device_id: 0x0110
type: UNKNOWN
known by bios: no
state state: 0x1f
query: 0x01
C0F7/C105 brightness <not supported>
EDID <not supported>
info device_id: 0x0200
type: TVOUT
known by bios: no
state state: 0x01
query: 0x00
C0F7/C106 brightness <not supported>
EDID <not supported>
info device_id: 0x0210
type: UNKNOWN
known by bios: no
state state: 0x01
query: 0x00
-------------------------------------------------------

-------------
Test Summary:
-------------
TOTAL: 17
PASS: 17
FAIL: 0
NOTSUPPORT: 0
UNRESOLVED: 0
UNTESTED: 0
-------------

*******************************************************
* Test ACPI drivers *
*******************************************************

-------------------------------------------------------
Driver State Action Results
ac loaded verifying PASS
unloading PASS
verifying PASS
loading PASS
verifying PASS
battery loaded verifying PASS
unloading PASS
verifying PASS
loading PASS
verifying PASS
button loaded verifying PASS
unloading PASS
verifying PASS
loading PASS
verifying PASS
ec build-in verifying PASS
fan loaded verifying PASS
unloading PASS
verifying PASS
loading PASS
verifying PASS
power build-in verifying PASS
processor build-in verifying PASS
thermal loaded verifying PASS
unloading PASS
verifying PASS
loading PASS
verifying PASS
video loaded verifying PASS
unloading PASS
verifying PASS
loading PASS
verifying PASS
container loaded verifying PASS
unloading PASS
verifying PASS
loading PASS
verifying PASS
memhotplug notsupport
numa notsupport
-------------------------------------------------------

-------------
Test Summary:
-------------
TOTAL: 12
PASS: 10
FAIL: 0
NOTSUPPORT: 2
UNRESOLVED: 0
UNTESTED: 0
-------------

*******************************************************
* Test ACPI P-state *
*******************************************************

Native Geyserville III Support (P state) - Demand Based Switching
###############################################################################
GV3/DBS validation for I386 and EM64T
Geyserville III is an efficient mechanism for switching to/from low
voltage mode - Enhanced SpeedStep Technology. Dependent upon ACPI.
-------------------------------------------------------------------------------
Red Flag Desktop 5.0 RTM
Kernel \r on an \m
Linux localhost.localdomain 2.6.14-7DT #1 Tue Jan 10 10:28:37 CST 2006 i686 i686 i386 GNU/Linux
-------------------------------------------------------------------------------
Start setup
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx est tm2
modprobe cpufreq_powersave
modprobe cpufreq_ondemand
The service cpuspeed should be stopped before running tests
Stopping cpuspeed: [60G[ [0;32mOK[0;39m ]
../tmp/system_update_info:
modprobe -r cpufreq_powersave
modprobe -r cpufreq_ondemand
/etc/init.d/cpuspeed restart
Finish setup
Execution of test_1_1
get_governors output:
ondemand powersave userspace performance
num CPU = 0
READ_GOVERNOR performance
MAX_FREQ 1867000
READ_FREQ 1867000
Test p_states_test_1_1 PASSED
Execution of test_2_1
get_governors output:
ondemand powersave userspace performance
num CPU = 0
READ_GOVERNOR powersave
MIN_FREQ 800000
READ_FREQ 800000
Test p_states_test_2_1 PASSED
Execution of test_3_1
get_governors output:
ondemand powersave userspace performance
num CPU = 0
READ_GOVERNOR userspace
Test p_states_test_3_1 PASSED
Execution of test_3_2
get_governors output:
ondemand powersave userspace performance
num CPU = 0
READ_GOVERNOR userspace
AVLBL_FREQS 1867000 1600000 1333000 1067000 800000
READ_FREQ 1867000
READ_FREQ 1600000
READ_FREQ 1333000
READ_FREQ 1067000
READ_FREQ 800000
Test p_states_test_3_2 PASSED
Execution of test_4_1
get_governors output:
ondemand powersave userspace performance
num CPU = 0
READ_GOVERNOR ondemand
Test p_states_test_4_1 PASSED
Execution of test_4_2
get_governors output:
ondemand powersave userspace performance
num CPU = 0
READ_GOVERNOR ondemand
MIN_FREQ 800000
READ_FREQ 800000
Test p_states_test_4_2 PASSED
Execution of test_4_3
get_governors output:
ondemand powersave userspace performance
num CPU = 0
READ_GOVERNOR ondemand
MAX_FREQ 1867000
READ_FREQ 1867000
Test p_states_test_4_3 PASSED
Execution of test_4_4
get_governors output:
ondemand powersave userspace performance
TMP_FILE_PID:
6831
num CPU = 0
READ_GOVERNOR ondemand
MAX_FREQ 1867000
MIN_FREQ 800000
READ_FREQ 1867000
Test _test_4_4 PASSED
Start cleanup
modprobe -r cpufreq_powersave
modprobe -r cpufreq_ondemand
FATAL: Module cpufreq_ondemand is in use.
modprobe -r cpufreq_ondemand: return code 1
Do attempt to change governor
module to be removed ondemand
available governors - ondemand userspace performance
set_governor userspace
modprobe -r cpufreq_ondemand
OK
/etc/init.d/cpuspeed restart
Starting cpuspeed: [ OK ]
Finish cleanup

Test Summary:
-------------
TOTAL: 8
PASS: 8
FAIL: 0
NOTSUPPORT: 0
UNRESOLVED: 0
UNTESTED: 0
###########################################################

Test report is in /root/acpi_abat_0.2/p_states/log/results/test_report, log file in /root/acpi_abat_0.2/p_states/log/stdout

*******************************************************
* Test ACPI C-states *
*******************************************************

Start to test ...

Test 1 ...
CONFIG_ACPI=y
CONFIG_ACPI_PROCESSOR=y

Test2 ...

------------
Test Summary:
-------------
TOTAL: 2
PASS: 2
FAIL: 0
NOTSUPPORT: 0
UNRESOLVED: 0
UNTESTED: 0
-------------

*******************************************************
* Test ACPI T-states *
*******************************************************

Start to test ...

Test1 ...
CONFIG_ACPI=y
CONFIG_ACPI_PROCESSOR=y

Test2 ...

Test3 ...

------------
Test Summary:
-------------
TOTAL: 3
PASS: 3
FAIL: 0
NOTSUPPORT: 0
UNRESOLVED: 0
UNTESTED: 0
-------------

ACPI ABAT finished...